File Size : 148 MB

The warmth and crunch that certain great valve gear brought to classic recordings is still missed today. Although many companies have tried to emulate classic valve hardware, we developed a proprietery new method for getting an authentic valve emulation

Features:

Distortion Modes:

Distortion Types A (Triode) & B (Pentode): Mode 1 has a smoother tone and upon moving towards mode 6 the tone becomes edgier resulting in more breakup of the sound. Both A & B Distortion types have different characteristics on all 6 modes.

Input Gain / Stereo Link:

Input Gain drives the signal harder into the valve circuit dialing in more distortion. Adjust this control as a drive control for more or less saturation

The Stereo Link switch enables the channel link mode for the 2 channels. So the Left channel will also control the right channel settings

Varislope Equalizer:

The Bass gain peaks at a frequency of 65Hz. The Bass Cut is a high pass filter. The Mid/ High-frequency boost control gives a bell type curve at 2.5kHz / 4kHz /12kHz, selectable. The ‘Mid Cut’ cuts mid frequencies at 1kHz. The ‘LPF – Low Pass Frequency’ control will allow the high frequencies to be cut when excessive distortion is used, smoothing the resulting sound.

Special Features:

Post/ Pre EQ Button (New): Put the EQ section before or after the Distortion Section

Smooth Mode Button (New): Makes the signal louder with less harsh peaks

Wet/Dry Fader (New): A Wet/Dry Mix control allowing you to mix in as much of the processed signal as needed

Whats New:

Updates: official site does not provide any info about changes in this version.