CopperCAM v25032016 | 6.2 MB

CopperCAM is an application for managing isolation engraving, drilling and cutting printed-circuit board prototypes. It does not integrate the direct drive of a CNC milling machine, but simply outputs files that can be loaded and used by external driver software, or data to be sent to the machine.

Its major functions are as follows:

- Native 32 bits program for Windows 95 / 98 / ME / NT-4 / 2000 / 2003-S / XP / Vista / 7 / 8

- Import of Gerber & Excellon files, with automatic or manual alignment

- Reading Gerber RS274-X format with macros, polygon surfaces and negative polarity traces

- Management of 4 circuit layers, plus drills, plus cut-out contours, plus centering holes

- Real-time display of equipotential paths through layers

- Automatic calculation of isolation contours, simple or multiple

- Extended isolation around pads, automatic clearance with hatches

- Manual modification of isolation contours (deletion or addition with auto-snap)

- Enforcement of isolation between very close pads

- Selection of tracks to be engraved at path centre (texts, logos or references)

- Possible drills with boring cycles, reducing the number of tool changes

- Automatic calculation of board contour cut-path, with manual addition of support bridges

- Edition and correction of diaphragms for pads and tracks, one by one or grouped

- Management of a tool library and drilling strategies depending on available cutters

- G-code output, or HPGL, DXF, Isel-NCP, Roland RDGL, etc.

- Fully customisable post-processor output

- Automatic chaining to a machining driver, or output to a virtual printer driver or a COM / LPT port

CopperCAM process sequence is simple:

- Opening Gerber file containing one circuit layer

- Opening next layers (maximum 4), if any

- Detecting or plotting card cut-out contour

- Opening Excellon file for drillings, if any

- Aligning layers (automatic or manual)

- Plotting tracks that are centerline texts

- Calculating isolation contours

- Hatching zones for removing all the copper

- Checking drill tools and eventual boring cycles

- Sending output data to the driver software or to the machine

Compatibility:

Windows 95 / 98 / ME / NT-4 / 2000 / 2003-S / XP / Vista / 7 / 8

Home Page

-

http://www.galaad.net/coppercam-eng.html