e-Xstream最新发布了Digimat 2016.0非线性多尺度材料和结构物建模平台

MSC Software 旗下的e-Xstream工程公司开发的DIGIMAT软件，是一款独一无二的非线性多尺度材料和结构物建模平台，它能满足复合材料供应商和终端用户设计最佳的新款材料和结构物的需要，同时它能减少生产成本以及相关的开发时间。

e-Xstream工程公司为客户提供一整套最佳建模解决方案，能满足客户的特定需要并综合考虑了现有设计工艺，包括原材料的复合（例如工程塑料、橡胶和碳纤维增强塑料CFRP等）以及制成品的加工工艺（例如注塑成型法）和应用程序.。

我们在欧洲、美国和日本拥有超过100个主要客户，同时对于各种用于汽车、航空、消费品和工业设备行业的材料（例如增强塑料、橡胶、硬质金属以及多孔层夹层板）所拥有的商业见解，增加了我们的数值模拟专业知识。

关于 e-Xstream engineering

e-Xstream engineering 成立于 2003 年，是一家专注于复合材料及结构多尺度建模的软件与工程服务公司。公司通过采用 Digimat 这一非线性多尺度材料和结构建模平台，帮助众多行业的客户、材料供应商及材料用户在设计创新材料产品时降低成本并缩短开发时间。自 2012 年 9 月起，e-Xstream engineering 成为 MSC Software 的全资子公司。e-Xstream engineering 的公司徽标和 Digimat 徽标是 e-Xstream engineering SA 的商标或注册商标。

e-Xstream Digimat 2016.0 | 796.5 mb

MSC Software Corporation and e-Xstream engineering, an MSC Software Company, and developer of Digimat, the leading nonlinear multi-scale material and structure modeling platform, has presented e-Xstream Digimat 2016.0.

DIGIMAT is a state-of-the-art nonlinear multi-scale material & structure modeling platform, which helps engineers to design and optimize composite materials in a fast and cost effective way. From small scale nanocomposites via honeycomb sandwich panels up to fiber reinforced plastics, rubber and hard metals, DIGIMAT software covers a large variety of materials being used in automotive, aerospace, consumer and industrial equipment industries. With its six different tools which can be licensed separately, the DIGIMAT modeling platform also offers a high degree of modularity.

Release highlights:

- Improved accuracy

Accuracy of reinforced plastics modeling is improved for both non-linear stiffness and failure. The Hybrid solution has been revised so that its non-linear response matches closely the reference Micro solution. Failure controls for multi-layer RVE have been added to improve the accuracy of identified failure models for reinforced plastics.

- Ease of use and efficiency

Usage of Digimat has been made easier and more efficient. Material model calibration workflow is now purely linear thanks to full control on microstructure definition in Digimat-MX. Hybrid parameters generation is fully automated, requiring no user input. Memory consumption has been reduced for coupled analysis involving the Hybrid solution with implicit FEA solvers. Loading of large FEA input deck files in Digimat is now easier thanks to the support of include commands.

- Efficient material engineering tools

Carpet plots of laminate properties as a function of ply orientation percentage can be generated in Digimat-MF or Digimat-VA, to provide guidelines on effect of stacking on composite performance. Failure envelopes of any type of composite can be created in Digimat-MF to understand the prediction of material failure for various biaxial loadings.

Removing the boundaries between injection molding and performance analysis of Reinforced Plastics with Digimat-RP/Moldex3D

Early design of reinforced plastic parts has classically faced many difficulties: process information such as fiber orientation might not be available yet, many iterations of design are required in a very short cycle time, material behavior is hardly accessible. These challenges add up to the common difficulty of designing plastic parts with metal based design tools, considering homogeneous isotropic material behavior.

Digimat-RP/Moldex 3D helps to overcome these challenges to accelerate early design of plastic parts and provides a quick and easy access to fiber orientation to structural engineers.

The fiber orientation estimator inside Digimat-RP/Moldex3D is based on fully integrated Moldex3D technology for meshing, flow simulation and fiber orientation computation. User guidance and productivity is assured for structural engineers, thanks to minimal required input, fully automatic meshing and solving, and strict focus on fiber orientation computation.

Digimat-RP/Moldex3D brings efficiency of predictive plastic part structural analysis to a whole new level. Multiple process or design iterations can now be achieved within a single day of work.

Extended support of FEA interfaces

Support of FEA interfaces is extended, focusing on:

- Ansys 16.0 solver (Windows/Linux), which comes along with the user-friendly ACT plug-in for Workbench

- LS-Dyna 7.1.2 (Windows/Linux)

Release Notes 2016.0 - January 2016:

DIGIMAT_20160_ReleaseNotesFinal.pdf

About e-Xstream engineering

Founded in 2003, e-Xstream engineering is a software and engineering services company 100% focused on the multi-scale modeling of composite materials and structures. The company helps customers, material suppliers, and material users across many industries reduce the cost and time needed to engineer innovative materials and products using Digimat, the nonlinear multi-scale material and structure-modeling platform. Since September 2012, e-Xstream engineering is a wholly owned subsidiary of MSC Software. The e-Xstream engineering corporate logo and Digimat logo are trademarks or registered trademarks of e-Xstream engineering SA.

About MSC Software

MSC Software is one of the ten original software companies and a global leader in helping product manufacturers to advance their engineering methods with simulation software and services. As a trusted partner, MSC Software helps companies improve quality, save time, and reduce costs associated with design and test of manufactured products. Academic institutions, researchers, and students employ MSC's technology to expand individual knowledge as well as expand the horizon of simulation. MSC Software employs 1,100 professionals in 20 countries.

Name:

e-Xstream Digimat

Version:

(64bit) 2016.0 rev.14471

Home:

http://www.e-xstream.com

Interface:

english

OS:

Windows XP / Vista / 7even / 8 / 8.1

Size:

796.5 mb