AutoPIPE Vessel CONNECT Edition V41 Update 2 | 1.7 GbThe Bentley product team is pleased to announce the availability of AutoPIPE Vessel CONNECT Edition V41 Update 2 (build 41.

02.

00.

005).

The Most Comprehensive Software for Vessel Pressure, Heat Exchanger, and Tank Design Optimization.

CONNECT Edition v41 Update 2 (Build 41.02.00.005 – Date: 2019-06)The following outline identifies new features and enhancements in the CONNECT Edition v41 Update 2 of AutoPIPE Vessel Build 41.

02.

00.

005.

EnhancementsSaddles Support– Added base plate thickness calculation.

The calculation procedure is based on bearing pressure method as explained in Dennis Moss Handbook (4TH edition).

User Interface: Tube Bundle Layout Design– Added a new panel with a tree view to select and visualize the bundle components like tie rods and spacers, sliding rails, sealing strips, sealing rods, partition plates and impingement baffles.

User Interface: Miscellaneous– Added a feature to select ASME VIII Division 2 class 1 or class 2 code (the 2 classes are based on different rules and allowable stresses) for analysis.

DefectsNOTE: Problems described below represent specific issues with specific test cases.

It is difficult to succinctly describe a problem and how it impacted the specific test case.

If you have any questions about the issues discussed in this report, please contact technical support.

Heat Exchanger#1013290: TSF nozzle material can’t be defined.

– Expansion Joint: the equivalent differential expansion pressure is no longer calculated.

Storage Tank#1025908: Nominal diameter is considered as external diameter not the centerline diameter.

Use Interface#957663: Leg wear plate missing data to define the geometry.

Calculation#1023271: ADB6 factors are not applied for the load condition calculations.

2D Drawings#1022877: The weights for erection and shutdown have been added in the table of weights.

Customizable FilesNOTE: Version 2.5Config\Material.emdm (Material Database) (Updated)Config\apacadin.dwg (Template – AutoCAD 2D drawings US units) (Updated)Config\apacadin.emsd (Keywords – AutoCAD 2D drawings US units) (Updated)Config\apacadmm.dwg (Template – AutoCAD 2D drawings SI units) (Updated)Config\apacadmm.emsd (Keywords – AutoCAD 2D drawings SI units) (Updated)Config\up_bib_in.cel (MicroStation 2D drawings US units) (Updated)Config\up_bib_in.emsd (Keywords – MicroStation 2D drawings US units) (Updated)Config\up_bib_mm.cel (MicroStation 2D drawings SI units) (Updated)Config\up_bib_mm.emsd (Keywords – MicroStation 2D drawings SI units) (Updated)AutoPIPE Vesselprovides you with cost-effective and accurate design of pressure vessels, heat exchangers, tanks, and air coolers.

Reduce mistakes and time consuming manual revisions.

Ensure greater efficiency with your supply chain and improved collaboration with engineering companies.

Increase your efficiency through fully automatic vessel design optimization under all installation and operating conditions.

Increase productivity and provide accurate design for the safe operation of vessels under all loading conditions for pressure vessels, heat exchangers, tanks, and air coolers.

Achieve compliance with regional and global standards, including pressure vessel design codes from the past 10 years and regional wind, seismic, wave, and blast-loading codes.

Improve flexibility for re-rating and revamping existing vessels.

You can design for both brownfield and greenfield projects, and shorten design time and rework by eliminating guesswork.

Ensure confidence in vessel design and improve your competitiveness through higher design quality.

This video features a SolidWorks 3D model generation from AutoPIPE Vessel.

AutoPIPE Vessel automatically creates parametric 3D models of designed vessels.

Individual component details are created and proper assembly mating features are all automatically modeled and hence what you get is a content rich, comprehensive 3D detailed model with intelligent data that can be further processed for completion of the engineering work.

Bentley Systems, Incorporated.

is the global leader dedicated to providing architects, engineers, constructors, and owner-operators with comprehensive architecture and engineering software solutions for sustaining infrastructure.

Founded in 1984, Bentley has nearly 3,000 colleagues in more than 45 countries, $500 million in annual revenues, and, since 2001, has invested more than $1 billion in research, development, and acquisitions.

Product:AutoPIPE VesselVersion:CONNECT Edition V41 Update 2 (build 41.02.00.005)Supported Architectures:32bit / 64bitLanguage:englishSystem Requirements:PC *Supported Operating Systems:*Size:1.7 Gb* AutoPIPE Vessel RequirementsThe minimum system configuration for installation:Operating System– Microsoft Windows 7 Professional Service Pack 1 or higher– Microsoft Windows 8 Professional or higher– Microsoft Windows 10 Professional or higher– 32 or 64 bit OS* For x64 operating systems you must install the accessdatabaseengine x64 which Microsoft delivers with Office 2010.

You can download this from Microsoft’s website.

When installing the product through the installer program, the required components will be installed automatically. If, however, you extract the package and then later run the EasyMultiInstall.vbs or the msi file to install the product, the Desktop Prerequisite Pack v08.11.09.xx must be installed on your workstation prior to the product installation. The RealDwg2012.msi should be installed after the product is installed. The Desktop Prerequisite Pack is available from the Web downloads area of SELECTservices Online. The contents of the Desktop Prerequisite Pack include:– Microsoft Windows Installer Version 3.1v2– Microsoft .NET Framework 3.5 SP1– Microsoft .NET Framework Version 4.5.1– Microsoft XML Parser (MSXML) 6 SP 1 (32 bit)– Microsoft XML Parser (MSXML) 6 SP 1 (64 bit)– Microsoft Visual Basic for Applications core– Microsoft Visual Basic for Applications localized– DirectX 9c– DHTML Editing Control for Applications* RealDWG 2012 is required by some features and must be installed.

RealDWG 2013 is not supported in this release.

The minimum recommended workstation profile for running AutoPIPE Vessel is:ProcessorIntel or AMD processor 3.

0 GHz or greater.

Memory256 megabytes (Mb) of free (1) RAM minimum, 4096 Mb or more is preferred.

AutoPIPE Vessel will utilize all available RAM.

AutoPIPE Vessel performance is dependent on the size of the AutoPIPE Vessel model and the amount of available system resources.

(1) Free RAM refers to available RAM after all operating system processes have been loaded.

Hard Disk4 GB free disk space.

Video Graphics CardAny industry-standard video card which supports OpenGL 3D graphics.

Screen resolution of 1280×1024 or greater.

CAD– MicroStation– AutoCAD x32 versions: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019– AutoCAD x64 versions: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019– SolidWorks x32 versions: 2010, 2011, 2012, 2013, 2014– SolidWorks x64 versions: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019Adobe PDF ReaderTo view, print, and save PDF files, Bentley recommends Adobe Reader 10 or higher.