Windows x64 | File Size: 22.5 MBThe warmth and crunch that certain great valve gear brought to classic recordings is still missed today. Although many companies have tried to emulate classic valve hardware, we developed a proprietery new method for getting an authentic valve emulationFeatures:Distortion Modes:Distortion Types A (Triode) & B (Pentode): Mode 1 has a smoother tone and upon moving towards mode 6 the tone becomes edgier resulting in more breakup of the sound.

Both A & B Distortion types have different characteristics on all 6 modes.

Input Gain / Stereo Link:Input Gain drives the signal harder into the valve circuit dialing in more distortion. Adjust this control as a drive control for more or less saturationThe Stereo Link switch enables the channel link mode for the 2 channels. So the Left channel will also control the right channel settingsVarislope Equalizer:The Bass gain peaks at a frequency of 65Hz.

The Bass Cut is a high pass filter.

The Mid/ High-frequency boost control gives a bell type curve at 2.

5kHz / 4kHz /12kHz, selectable.

The ‘Mid Cut’ cuts mid frequencies at 1kHz.

The ‘LPF – Low Pass Frequency’ control will allow the high frequencies to be cut when excessive distortion is used, smoothing the resulting sound.

Special Features:Post/ Pre EQ Button (New): Put the EQ section before or after the Distortion SectionSmooth Mode Button (New): Makes the signal louder with less harsh peaksWet/Dry Fader (New): A Wet/Dry Mix control allowing you to mix in as much of the processed signal as needed